Villawood Immigration detention centre (VIDC)

Description

Location: Chester Hill  Sydney NSW.

MNJ group was the contactor involved in the supply and installation of all 358 mesh security fencing and gates for the newly built Villawood immigration detention centre. The project was split up over 3 stages. The first was to build the new internal fencing. As per the following:

  • Involved in this was the design, fabrication and installation of 625LM of 358 mesh security fencing 4.5m high.
  • Design, Fabrication and installation of ten 1200mm wide personnel gates.
  • Design, Fabrication and installation of six double gates.
  • Design Fabrication and installation of one double vehicle gate 6000mm wide X 4500mm high.
  • Excavation and design of 625LM of concrete footing 1200mm x 600mm thick.
  • Form and pour all concrete for footings.
  • Removal of spoil from site
  • Supply & installation of all formwork and steel for concrete footing.
  • Non destructive digging around services.
  • Supply of all service searches and geo tech reports.
  • Supply of all shop drawings and engineering.

MNJ group also carried out the Stage 2 fencing works which consisted of building a new perimeter sterile zone fence from sally port 1 to sally port 2 .

  • Design ,fabrication and installation of 750LM of 4.2 high 358 mesh fencing with 900mm diameter barrel top.
  • Design, Fabrication and installation of five 1200mm wide personnel gates.
  • Design, Fabrication and installation of one 4200mm wide X 4500mm high double vehicle gate.
  • Design, Fabrication and installation of compactor enclosure.
  • Design, Fabrication and installation of one 2400mm double gate.
  • Supply & installation of 760mm razor wire to roof of buildings.
  • Supply & installation of 750LM of 900mm diameter barrel top.
  • Excavation and design of 528LM of concrete footing 1200mm x 600mm thick.
  • Excavation and design of 222LM of concrete retaining wall footing.
  • Supply & installation of all formwork and steel for concrete footing.
  • Form and pour all concrete for footings / retaining walls.
  • Non destructive digging around services.
  • Supply of all service searches and geo tech reports.
  • Supply of all shop drawings and engineering.
  • Removal of all spoil from site.

The final stage of the project was to finish 100lm of 358 mesh security fencing 4.2m high with barrel top which would link up the perimeter fencing works through stage 3 of the project.

  • Design ,fabrication and installation of 100LM of 4.2 high 358 mesh fencing with 900mm diameter barrel top.
  • Design, Fabrication and installation of one 1200mm wide personnel gates.
  • Design, Fabrication and installation of one 4500mm wide X 4500mm high double vehicle gate.
  • Supply & installation of 100LM of 900mm diameter barrel top.
  • Excavation and design of 100LM of concrete retaining wall footing.
  • Excavation and design of gate crossing.
  • Supply & installation of all formwork and steel for concrete footing.
  • Form and pour all concrete for footings / retaining walls.
  • Non destructive digging around services.
  • Supply of all service searches and geo tech reports.
  • Supply of all shop drawings and engineering.
  • Removal of all spoil from site.

Some of our Clients

MNJ Group
7/19 Enterprise Circuit Prestons NSW 2170
Phone: 1300 451 484
Fax: 02 9825 8100
E: mnjgroup@live.com.au